العربية 
467 References in the catalogue
The filter range
A 467-reference catalogue covering commercial vehicles and heavy equipment — trucks, buses, trailers and plant.
ME Filter
The filtration partner for Middle East fleets
0
References in catalogue
0
Filter groups
0+
Countries served
Manufacturing and range
What it offers!
Pleating and curing the media
The media is pleated to a set pleat height and pitch, then passes through an oven that cures the resin so the pleats hold their shape and spacing under working pressure. Pleat spacing is what sets the effective filtration area and the pressure drop — pleats that collapse against each other cost the filter part of its area while it is in service.
Bonding and sealing
A bead of adhesive is laid on the end plate in a controlled amount and position. That bead is the line between oil that goes through the media and oil that goes around it — a leak at the seam carries contamination straight to the bearings, with nothing on the filter itself to show for it.
Robotic assembly
A robot arm picks the element and sets it in place on the line. The gain is not speed but repeatability: every unit is assembled in the same position with the same force, so the thousandth filter is no different from the first — which is the difference a fleet notices when it buys a full carton rather than a single piece.
The finishing line
Cylindrical elements and panel frames come off one line after assembly. Finishing is the last place dimensions, edge flatness and frame integrity are checked before packing — and the last chance to stop a defective unit before it reaches a distributor’s shelf.
12 Filter families
Twelve groups
Air, oil, fuel, fuel/water separation, cabin and recirculation, plus air dryer, chassis, hydraulic, industrial dust cartridges, compressor and generator, and natural gas line.
The cross-reference
Every code is tied to its original-equipment cross-reference, so a buyer orders with the number already in front of them instead of hunting for a match.
Design to manufacturing
Mould making and the production of plastic and sheet-metal parts happen inside the company’s own plant, which shortens the road from a design to a finished product.
About the company
About
ME Filtre San. ve Tic. A.Ş. — a filtration brand for commercial vehicles and industrial applications, built on customer satisfaction, product quality, continuous improvement and after-sales support. The range covers air, oil, fuel, cabin, air-dryer, chassis and fuel/water separator filters, alongside hydraulic filters, industrial dust cartridges, silo ventilation filters, compressor and generator filters, and natural gas line filters.
- Innovative products
- Quality
- Trusted
- Long life
From design to manufacturing
The company works to a design-to-production philosophy: mould making and the production of the plastic and sheet-metal parts for the products it designs are carried out within its own structure, which is what lets it answer quickly and bring a new product out in a short time.
Its product range, machine range and production capability are combined with a specialist technical team to give fast and economical solutions.
Cross-references
The range is built on a cross-reference table covering Mercedes-Benz trucks and buses — Actros, Atego, Axor, Arocs and Antos — as well as Volvo, MAN, Scania, DAF and Iveco, so a dealer can settle on the right number before ordering.
Fits
Scania
Ford Trucks
Product album
A sample of the range
A quick guide
What each filter does
Six families covering the truck's systems: air, oil, fuel, water separation, cabin and air dryer.
Product groups
The references we manufacture and supply under each group.
Air filters (162 references)
Oil filters (142 references)
Fuel filters (87 references)
Fuel/water separators (42 references)
Cabin filters (33 references)
Air-recirculation filters (1 references)